Author Topic: Bar end mirrors  (Read 1612 times)

0 Members and 2 Guests are viewing this topic.

Offline kwalmsleyy

  • 660 Member
  • **
  • Topic Author
  • Posts: 49
  • Country: gb
Bar end mirrors
on: March 06, 2021, 08.26 AM
Hi all, just to make you aware - the bar end mirrors for the Street Triple fit the Trident.

I’m not personally a fan of the round mirrors so will be getting the “sport” mirrors from the Street Triple.

 :002:

#1

Offline Gonzy

  • 660 Member
  • **
  • Posts: 33
  • Bike: Trident 660
  • City / Town: CAINTA
  • Country: ph
Re: Bar end mirrors
Reply #1 on: April 21, 2021, 06.07 AM
The bar end mirrors of the Bobber Black fit as well, if you prefer something round aside from the Trident specific ones.  A bit pricey though.

#2

Offline kwalmsleyy

  • 660 Member
  • **
  • Topic Author
  • Posts: 49
  • Country: gb
Re: Bar end mirrors
Reply #2 on: April 21, 2021, 09.03 AM
A lot of the triumph range does - I’ve actually gone for the bar end mirrors from the speed twin.

Standard on the left, speed twin on the right.



I did go for some aftermarket ones first, but they were awful  :008: tightened the bolt on the bar and it snapped since the bolt was tightening the “slit” rather than forming a circle. I was surprised as the reviews were really good, but they accepted my return no questions asked (might have been a common issue).

These Triumph ones fit perfectly and have no issues. You’ll need the following Triumph part numbers;

T2060314 x2 (mirror)
T3050159 x2 (screw for mirror)
T2060499 x2 (friction ring)
T2042476 x2 (bar end finisher) - no need to buy the kit as you can reuse your standard bolts

Last Edit: April 21, 2021, 09.05 AM by kwalmsleyy

#3

Offline Gonzy

  • 660 Member
  • **
  • Posts: 33
  • Bike: Trident 660
  • City / Town: CAINTA
  • Country: ph
Re: Bar end mirrors
Reply #3 on: April 21, 2021, 09.09 AM
Nice!  I guess I'll post a picture of mine as well for other's reference when I get the bike this week.

#4

Offline kwalmsleyy

  • 660 Member
  • **
  • Topic Author
  • Posts: 49
  • Country: gb
Re: Bar end mirrors
Reply #4 on: April 21, 2021, 09.15 AM
Also need 2x M10 anti-clockwise blanking plugs for the old mirror holes.

The ones I got are no longer available, but these are similar:

https://www.ebay.co.uk/itm/312474298185

#5

Offline Gonzy

  • 660 Member
  • **
  • Posts: 33
  • Bike: Trident 660
  • City / Town: CAINTA
  • Country: ph
Re: Bar end mirrors
Reply #5 on: April 27, 2021, 03.40 PM
Bar end mirrors from Bobber Black (stock):




#6

Offline Seahorse72

  • 660 Newbie
  • *
  • Posts: 9
  • Bike: Trident 660
  • City / Town: River Bend
  • Country: us
Re: Bar end mirrors
Reply #6 on: November 22, 2021, 01.20 AM
Do you experience any fuzzy images due to vibration?

#7

Offline Gonzy

  • 660 Member
  • **
  • Posts: 33
  • Bike: Trident 660
  • City / Town: CAINTA
  • Country: ph
Re: Bar end mirrors
Reply #7 on: November 22, 2021, 03.35 AM
*Originally Posted by Seahorse72 [+]
Do you experience any fuzzy images due to vibration?

Nope, I don't think so.  I'll pay extra attention the next time I ride it and give you a definitive answer then, at least for ciy riding.

#8

Offline Gnawfree

  • 660 Pro
  • ***
  • Posts: 110
  • Bike: Matt Black & Silver
  • City / Town: Chichester
  • Country: gb
Re: Bar end mirrors
Reply #8 on: November 24, 2021, 04.36 PM
*Originally Posted by Seahorse72 [+]
Do you experience any fuzzy images due to vibration?

I did at about 5.5k on - see   https://www.trident660.com/index.php/topic,260.msg1491.html#msg1491l
Last Edit: November 24, 2021, 05.03 PM by Gnawfree

#9

Offline Gonzy

  • 660 Member
  • **
  • Posts: 33
  • Bike: Trident 660
  • City / Town: CAINTA
  • Country: ph
Re: Bar end mirrors
Reply #9 on: November 24, 2021, 05.44 PM
Just got back from a short city ride.  No distortion in the mirror image up to 100kph, through revs up to 7k.  Must be because my mirror is pretty tight.